Stargo

Stargo

Description:
Soft silky hand with mild two-tones all with water based technology high light characteristics of this top grain semi-aniline leather finished in Italy. Stargo is made on a high grade European cow hide, which is a premium raw material. The soft drape exemplifies the quality and value of this article and is achieved by a slightly lighter weight raw material. The best Italian leathers are cut from .9-1.1mm to give the leather a tighter grain and overall better hand naturally. The color pallet is functional for both traditional and transitional settings. Natural range marks, fat wrinkles and healed scars are not to be considered defects but proof of the authenticity of the leather. Due to the water based technology Stargo emits super low VOC’s and is lead free.

32 colors available Stocking colors

Technical Data:
Finish Type: Semi-Aniline, water based technology
Content: European Cowhide
Country Finished: Italy
Size: 50 sq. ft. (+/-)
Thickness: 0.9-1.1 mm
Weight: 2.5-2.75 oz. per sqft

Test Performance:
Test:/ Method:/ Result:
Dry Rubbing:/ EN ISO 11640/ 500 cycles / min 4
Wet Rubbing:/ EN ISO 11640/ 80 cycles / min 4
Perspiration Rubbing:/ EN ISO 11640/ 50 cycles / min 4
Adhesion of Finish:/ EN ISO 11644:2005/ 2 N/CM
Abrasion Resistance:/ CS10 Taber, 1000 +/ Pass 100g
Blocking:/ ASTM D6116/ Pass
Grab Strength:/ ASTM D2208/ Pass 100lbs min
Flex Endurance:/ EN ISO 5402:2004/ 60,000 +
Aging from Heat:/ EN ISO 17228 / MIN 3
Color Fastness to Light:/ EN ISO 105-B 02/ MIN 4
Cigarette Match Test:/ EN ISO BS5852-1-2/ REF.TO
Tear Strength:/ EN ISO 3377-1/ 20 N/MM or 100 lbs. min
Elongation:/ ASTM D2211/ 40% max @100 lbs.
Stitch Tear:/ ASTM D4705/ 15 lbs. min

Flame Resistance:
CA 117
NFPA 260
FMVSS 302
Can be treated to pass FAR 25.853 FAA
UFAC